Polesaw SILKY Zübat 2700-7.5 2-piece, extendable 175 - 270 cm, saw blade 33 cm

Silky polesaw Zübat 2700-7.5 with 2-piece telescopic handle extendable from 175 to 270 cm, complete with saw blade 33 cm long with 7.5 tines per 30 mm.

The Silky Zübat 3900-7.5 is a two-piece polesaw with an extendable aluminium handle from 175 to 270 cm. The bent saw blade makes a cut 1.4 mm wide. The bent shape helps keep the blade in the cut during the pulling saw motion.

The blade has a coarse Mirai-Me tooth pattern of 7.5 tines per 30 mm. The non-set teeth are sharpened on multiple sides and quickly remove sawdust. This coarse tooth pattern bites quickly and is intended for fresh, moisture-rich wood. In dry wood, the coarse teeth may engage less evenly and cause more vibration.

The saw blade is made of high-quality Japanese steel and features a wear-resistant nickel coating that protects against rust formation. The tooth tips are inductively hardened, so they stay sharp for a long time.

Thanks to the oval shape of the aluminium polesaw, the saw blade stays in the correct sawing direction and provides precise control when pruning at height. The oval shape of the handle also provides strength and rigidity לאורך the full length and minimizes bending to a minimum.. The locking mechanisms (push buttons and clamps) together provide the safest and most stable locking of the desired handle length.

The clamps on the handle and the fastening knob of the saw blade with socket are both attached in line with each other on the top side of the telescopic handle. The lower pole section is wrapped with rubber for a comfortable and secure grip.

After use, clean and dry the blade thoroughly. Remove resin with a resin remover or olive oil. Store the polesaw in a dry place.