Digging shovel ATLAS 1/4 000 hardened, clear lacquered, without handle
Digging shovel ATLAS Drents model with socket position 1/4 bent up and blade size 000, supplied without handle.
Explanation of socket mode
The socket angle indicates the angle relative to the blade. The higher the socket angle, the more inclined the socket is. This determines whether a shovel or spade is designed for stabbing or scooping. The socket angle is measured from the ground to the socket when the blade lies flat on the ground.
Straight: the handle is almost straight in relation to the blade
1/4: the socket is bent by 35 mm, for example for digging shovels
1/2: the socket is bent up by 55 mm, for example for scoop shovels and concrete shovels
3/4: the socket is bent up 70 cm, for example on scoop shovels and deep shovels
Explanation of blade width
In the past there were blade widths that ran from number 2 down to 0, with 2 being the largest. Over time the blades had to be made smaller because of the working conditions, and smaller sizes were introduced.
The blade sizes for shovels and spades are from large to small: 2 – 1 – 0 – 00 – 000
Click here for more information about models,
impact, blade width & socket positions
| Order unit: 1 |
| Package quantity: 12 |
| Product code: 780710 |
| EAN code: 8712129807102 |
| Brand: Atlas |
| Tool material: Steel |
Atlas
Topkwaliteit duurzaam gereedschap in Nederland geproduceerd
Alternatieve producten
Je dynamische Snippet wordt hier weergegeven...
Dit bericht wordt weergegeven omdat je niet zowel een filter als een sjabloon hebt opgegeven om te gebruiken.
Accessoire producten
Je dynamische Snippet wordt hier weergegeven...
Dit bericht wordt weergegeven omdat je niet zowel een filter als een sjabloon hebt opgegeven om te gebruiken.